ANCHOR TECHNOLOGY
Concentrate vacuum beneath the media to reduce masking and preparation time.
LARGE-FORMAT UV-LED FLATBED PRINTER
Faster setup. More creative possibilities.
Large-format UV printing with a 98.4 × 59.1-inch print area, 4-inch media clearance, and fluorescent and dimensional printing options.
MSRP$99,995
Request printed samples
BUILT FOR LARGE-FORMAT APPLICATIONS
Simplify media preparation and expand your range of large-format graphics and decorative products.
Concentrate vacuum beneath the media to reduce masking and preparation time.
Accommodate thicker materials and finished products up to 101.6 mm high.
Add fluorescent pink and yellow for vivid graphics, depending on ink configuration.
Print uneven surfaces with LD4 mode, or build layered ink textures up to 5 mm.
EXPLORE THE APPLICATIONS
Signage • Displays • Interior materials • Decorative products. Official Mimaki application illustrations; examples may be renderings. Test your materials and intended finishes.
| Maximum print area | 2,500 × 1,500 mm / 98.4 × 59.1 in |
|---|---|
| Maximum media thickness | 101.6 mm / 4 in |
| Maximum resolution | Up to 1,200 dpi |
| Printheads | 4 staggered piezo heads |
| Color + white draft speed | Up to 42 m²/hour / 452.1 ft²/hour |
| Maximum print area | 2,500 × 1,500 mm / 98.4 × 59.1 in |
|---|---|
| Maximum suction area | 2,500 × 1,930 mm / 98.4 × 76 in; not the printable area |
| Maximum media thickness | 101.6 mm / 4 in |
| Media load | Less than 50 kg/m² / approximately 10.2 lb/ft²; no concentrated loading |
| Printheads | 4 staggered on-demand piezo heads |
| Maximum resolution | Up to 1,200 dpi |
| Color + white draft speed | Up to 42 m²/hour / 452.1 ft²/hour — 300 × 300 HQ, 4 passes |
| CMYK × 2 high-speed mode | Up to 56 m²/hour / 602.8 ft²/hour; configuration without white or clear |
| LD4 head-to-surface distance | Up to 20 mm / 0.79 in |
| Layered ink effects | Up to 5 mm / 0.20 in |
| Ink families | ELH-100 hard UV; ELS-120 flexible UV; EFS-150 fluorescent UV; PR-200 primer |
| Color options | CMYK, light cyan, light magenta, white, clear, fluorescent pink/yellow, and primer; availability depends on configuration |
| Ink supply | 1 L bottles; 250 ml also available for ELH-100, ELS-120, and PR-200 |
| Media holding | ANCHOR TECHNOLOGY; suction holes at 25 mm pitch |
| Curing | UV-LED |
| Interface | Ethernet 1000BASE-T |
| RIP software | RasterLink8 |
| Power supply | Two single-phase AC 200–240 V ±10% feeds: 12 A or less and 10 A or less |
| Power consumption | INLET1: 2.88 kVA or less; INLET2: 2.33 kVA or less |
| Dimensions (W × D × H) | 4,400 × 2,520 × 1,490 mm / 173.2 × 99.2 × 58.7 in |
| Machine weight | 920 kg / approximately 2,028 lb |
ANCHOR TECHNOLOGY seals unused suction holes automatically. Touchscreen-controlled registration pins help position media and retract before printing. Severely warped materials require testing.
Color + white: up to 42 m²/hour (452.1 ft²/hour) in 300 × 300 HQ, 4-pass draft mode. CMYK × 2: up to 56 m²/hour (602.8 ft²/hour) in high-speed mode. Actual throughput varies with the job and setup.
LD4 supports a distance of up to 20 mm between the printhead and printing surface. This is separate from the 101.6 mm maximum media thickness.
Ink layering enables texture, clear gloss, and Braille applications. Maximum layering is 5 mm; results depend on artwork, materials, ink configuration, and settings.
ELH-100 hard and ELS-120 flexible inks support different applications. EFS-150 fluorescent pink/yellow and PR-200 primer are used with compatible UV ink configurations. Confirm the ink combination with IDS.
Mimaki identifies RasterLink8 for this model, including fluorescent-color processing, automatic image alignment, and printer-to-printer color matching.
REQUEST A QUOTE OR SAMPLE
Tell us about your materials, panel sizes, and printing goals. Our team will help you evaluate the JFX220-2515. Request a printed sample to explore the results.