The PYROTRACK is a flame pretreatment unit specifically designed for the rapid application of flame and Pyrosil to the surface flat objects. This application helps the printed ink bond to the surface of the material.
Not only is the system designed for flame AND/OR Pyrosil treatments, but the fully adjustable height (up to 20.25”) allows operators to treat products ranging from flat sign blanks to coolers.
The PYROTRACK system can treat a wide range of materials. The list includes, but is not limited to: stainless steel, aluminum, glass, polypropylene, and plastic. The machine has nine (9) burners which can be independently controlled depending on the desired treatable area. This feature prevents waste of fuel and Pyrosil.
PYROTRACK / PYROSIL FLAME TREATMENT SYSTEM SPECIFICATIONS
|Conveyor/Track||18” W x 66” L track feeds products/materials through the flame treatment system. The maximum product weight/load is 75 lbs.|
|Load/Unload||Approximately 30” of the track is available for loading products onto the unit. There is approx. 24” available for unloading products from the unit.|
|Burner System||Nine (9) Independently controlled burners.|
|Max Product Height||20.25” max height clearance. The max product height for treatment is 19.7”. The product needs to remain a small distance from the flame.|
|Max Product Width||19” max width clearance. The system has a maximum product treatment area/width of 18”|
|Pyrosil Canister Capacity||600 mL|
|Dimensions||70” L x 31.1” W x 63” H. The 63” H is when unit is set to max height.|
Weight: 330 lbs. Interface: 7” Color HMI
|Environment||Temperature: 16 to 28C (61 to 82F degrees). |
Dust: Equivalent to normal office level
|Electrical||Input: 110 Volts AC, 5A; 24 Volt and 5 Volt DC for controls and motors|
Are you having challenges with ink adhering to your products?
IDS print experts are ready to answer your questions relating to technical information or your custom requirements.